Fona MyCrown

tarafından koucheh dental

Fona MyCrown

  • Fully integrated system:The system comes complete with acquisition unit with 2D and 3D camera, state-of-the-art intuitive software and milling unit. MyCrown Design guides you through each step of the process for easy acquisition, proposal and creation of the desired restoration. The MyCrown Mill with dual spindles completes the process by creating the pre-approved design, ready for use.

  • Fast and easy to use: The intuitive guided software ensures fast and easy operation of the unit. The step-by-step guided process guarantees quick planning and smooth delivery of a beautiful milled crown or other supported restorations

  • Grow your clinic: Grow your clinic like never before with MyCrown CAD/CAM system! Allowing to create the most common restorations in general dentistry - crowns, veneers, inlays, onlays and small bridges – in one visit it is an excellent solution to take control of your dental practice and invest in new services and equipment

  • Intuitive workflow :Creating a crown has never been easier with the advanced software guiding you through every step. Once the preparation phase has been completed, MyCrown Design takes you through the steps required to take you to the final – manufacturing – phase.

  • After the patient has been prepared for scan, the first step to your new design is patient creation in the software and filling in basic patient data.

  • The next step is acquisition phase. With the help of MyCrown Scan you need to scan just the restoration area and neighbouring teeth. The compact intraoral camera displays the area in real-time on the display in front of you. In order to calculate the proportions of the case, a scan of the upper and lower jaw is required, including buccal bite

  • Once the scan has been completed, you’re taken to the model phase. Here you are guided to indicate the margins of the restoration area and set the axis of restoration insertion.

  • The next stage is design. The software already has a fitting proposal with great anatomy respecting the shape of the neighbouring teeth and occlusal contact. Further tools are available for fine-tuning, such as adjustments of the contact points and anatomic shape of the crown

  • The final step is the Manufacturing phase. Once you’ve approved your design, all you need to do is simply place the block and mill your restoration, thanks to the fully integrated system. In a few minutes you will be holding a beautiful crown or other needed restoration in your hands, ready to be polished and placed in the restoration area.

  • Your patient will leave with a beautiful smile once again, completed in one visit.



  • Saving time :The full process of restoration is completed in a single appointment thus saving time for both patient and dentist.

  • No need for conventional impressions : The intuitive scan and MyCrown design software eliminate the need for conventional impressions, waiting time and further appointments.

  • Restoration accuracy and control: The state-of-the-art camera scans the area and advanced software produces a design with high accuracy and precision while, at the same time, allowing to make adjustments for a perfect fit

  • Patient comfort : Unlike alternative impression-taking methods the process is efficient and the patient feels minimal discomfort. Scanning the restoration area with the compact camera is smooth and fast. The efficient treatment and lasting results persuade more and more patients to prefer one visit restorations to alternative options.

  • Freedom to choose material : With MyCrown Mill you are not limited to working with a specific manufacturer or material. The restoration blocks can be selected to suit your workflow and specific needs

  • Save and share your design : The system allows to export the finished design for future reference and easily share it within the clinic or multiple offices.

  • Crowns and more in one visit : The MyCrown fully integrated CAD/CAM solution is able to create crowns, veneers, inlays, onlays and small bridges in just one visit. Choose the restoration block to be inserted to allow the use of preferred material and customise aesthetics to fit the patient.

  • Integrated system : The fully integrated complete system ensures high precision and smooth workflow due to steady communication between the MyCrown Scan, MyCrown Design software and MyCrown Mill.

  • HD spray :MyCrown HD spray applies a thin layer of black and white particles that are traced and measured to produce a precise model with colour of the restoration without reflections

  • 3D Image Acquisition and 2D Intraoral Camera in One Device : MyCrown comes with a camera that can be used in 2D and 3D mode. It can be used as a 2D intraoral camera thanks to the built-in colour sensor, improving dentist-patient communication. Switching from 3D scan to 2D photos and videos is done easily, by the click of a button.

  • Hygiene : The units are easy to maintain due to minimalist design with recommended use of antibacterial wipes or high level disinfection liquid. The camera is used in combination with single-use hygiene sheaths to protect the dentist and patient.

  • MyCrown Design : The CAD/CAM system features a fully integrated software guiding you through every step ensuring smooth performance and ease of use. The unit comes with touchscreen monitor and cart on wheels, allowing easy transportation between treatment rooms if needed and easy storage during non-operational times

  • MyCrown Scan:The small and light camera is easy to use and allows comfortable reach of all intraoral areas. The real-time 3D scan is precise and immediately available to view. The lightweight design allows simple manipulation and ensures minimal patient discomfort during acquisition while guaranteeing maximum hygiene as it is used with single-use protective sheaths. The camera is preheated thus preventing fogging and ensuring minimal time required for the scan.

  • MyCrown Mill: Immediately ready to use, MyCrown Mill communicates with the software through wireless connection, can serve multiple acquisition units, plugs into the power outlet and requires no air or water line, making it suitable for nearly all working areas. The two-spindle system, with milling and grinding properties, ensures high speed restorations with an average of 12 minutes required to produce a crown. The size of the unit is compact allowing it to fit in every dental office.




MyCrown Design:


Type designation MyCrown Design
Rated line voltage 100-240 V ~ / 50/60Hz
Nominal current 3.0A to 2.0A
Type of protection against electric shock Class I device
Type of protection against electric shock (camera) Type BF applied part
Degree of protection against ingress of water Ordinary device (without protection against ingress of water)
Degree of contamination 2
Installation category II
Operating mode Continuous operation

Transport and storage conditions

Temperature -25 ℃ to +60 ℃ (-13 °F to +140 °F)
Relative humidity 10% to 75%
Air pressure 700hPa - 1060hPa

Operating conditions

Ambient temperature -25 ℃ to +60 ℃ (-13 °F to +140 °F)
Relative humidity 10% to 75%
Air pressure 700hPa - 1060hPa
Operating altitude ≤ 3000m
Dimensions (WxHxD) in mm 635 x 1170 x 525
Total weight, approx. 33 kg
Approx. weight without stand 15 kg
Approx. weight of stand 18 kg


MyCrown Mill:

Type designation Mill and grinding unit MyCrown Mill
Rated line voltage 100 V - 230 V ~
Rated power frequency 50/60 Hz
Rated current 1.5 - 3.5 A
Nominal power output 320 VA
Permissible line voltage fluctuations 50% in Chopped Mode (Variable in Peak Pulse)
Type of protection against electric shock ±10% of nominal voltage
Degree of protection against ingress of water Ordinary device (without protection against ingress of water)
Overvoltage category II
Ambient conditions For indoor use
Pollution degree 2
Air pressure 700 hPa – 1,060 hPa
Temperature range 5 ℃ - 40 ℃
Humidity range 80% rel. up to 31 °C decreasing to 50% rel. up to 40 °C
Operating mode Continuous operation
Dimensions (WxHxD) in mm 700 x 425 x 420
Weight Approx. weight 43 kg



Molla Gürani Mah. Oğuzhan Cd. NO:6/B Fatih /İstanbul


Your message has been sent. Thank you!